 
 C/m2. 
 A small circular hole has been cut out of the middle of this 
 sheet of charge, as shown on the diagram.  
 Ignoring ``fringing'' of the field lines around all edges, 
 calculate the electric field at point P a distance 
 z = 1.0 m 
 up from the centre of the hole along its 
 axis.  The radius of the hole is 
 R = 0.4 m.
 C/m2. 
 A small circular hole has been cut out of the middle of this 
 sheet of charge, as shown on the diagram.  
 Ignoring ``fringing'' of the field lines around all edges, 
 calculate the electric field at point P a distance 
 z = 1.0 m 
 up from the centre of the hole along its 
 axis.  The radius of the hole is 
 R = 0.4 m. 
 
 m) copper sheet and a roll of 
150
m) copper sheet and a roll of 
150  m thick strontium titanate dielectric 
 (dielectric constant 310) 
 and form a capacitor as follows: cut the sheets into strips 
5 cm wide and sandwich the dielectric sheet between 
 two sheets of copper.  Then fold the sandwich back and forth 
 to fill a cube 
5 cm on each side.  Assuming that we can press the layers 
 together firmly so that there are no empty spaces, find:
m thick strontium titanate dielectric 
 (dielectric constant 310) 
 and form a capacitor as follows: cut the sheets into strips 
5 cm wide and sandwich the dielectric sheet between 
 two sheets of copper.  Then fold the sandwich back and forth 
 to fill a cube 
5 cm on each side.  Assuming that we can press the layers 
 together firmly so that there are no empty spaces, find: 
 F, 
C2 = 
1.0
F, 
C2 = 
1.0  F, 
C3 = 
4.0
F, 
C3 = 
4.0  F and 
C4 = 
3.0
F and 
C4 = 
3.0  F.
F. 
